With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good Carrying capacity along roads with good Carrying capacity. The goal with this work was to create a method to find the stands with high Carrying capacity located near roads with high Carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load Carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

Mulitresistent staphylococcus aureus (MRSA) is a bacteria that is resistent against penicillin, this makes it difficulte to treat. MRSA causes woundinfections and other seriouse conditions. If MRSA establishes in an hospital environment it often spreads fast. Common ways of spreading MRSA is through direct or indirect contact. The nurse should work according to guidelines, apply hygienic routines and prevent the spread of infections.

The study aims to give a description of the conditions in which matters is prepared withinSwedish Government`s offices, to describe the adaptive capacity in the agency`s internalprocesses by investigating the experiences of some civil servants restricted to the Ministry ofEnterprise and the Ministry of Environment in their work with the EU Maritime Policy GreenPaper. The results have been analyzed against the basis of eight identified criteria of buildingadaptive capacity in socially dominated systems. The criteria are comprised of both individualand organizational abilities. Only two of them were fully met; the criteria about diversity inexperiences and knowledge and the criteria about information and how the information hasbeen applied. However, the process has traces of all the identified criteria.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

In modern military operations the requirements of transmitting large amounts of information have increased substantially during the last decade. This increases the demand for high-capacity radio networks. It is also very important that military decisions are made on recent and correct information and this implies that low and known delays are required. The existing military radio ommunications, within the Swedish army, do not meet the requirements for capacity and delay. We have investigated how the capacity and average delay can be improved in an Ad Hoc network with STDMA by using antenna arrays.

This thesis takes as its starting-point the different stands on the ever ongoing growth of multinational corporations (MNCs) and its consequences. Two opposing branches of theories, arguing that the establishment of MNCs in developing countries is good respectively bad for these countries, are tested for the aspect of state capacity. A quantitative method is then used to test if there exists such a relationship at all and if so, which of the two notions that are right.The presence of MNCs is measured as FDI of GDP while state capacity is defined as a combined index for three of ICRG's Political risk indicators. The two variables are analysed, mainly by cross tabulation, using an extensive dataset of 130 developing countries measured for a period of 20 years.The outcome is though ambiguous: No solid correlation can be found, but countries with a higher rate of FDI of GDP tend to have a slight worse rate of state capacity throughout the analysis. Thus the result points in favour of the notion that MNCs are bad for developing countries? state capacity.

Crossfit is a recently developed form of training which is based on a number of functional resistance exercises performed at high intensity, often to the point of muscular failure. Crossfit has since its introduction 30 years ago, reached vast popularity all around the world, including Sweden. Its practitioners considers Crossfit to be an effective training method for achieving a functional and total trained physique thru improvements in VO2max, muscle strength, endurance, balance and speed. Few scientific studies has been published in the subject which is why this study sets out to examine the effect of Crossfit on VO2max (measured with Åstrands submaximal cyclingtest), maximal strength capacity in lower- and upper body muscles (measured with 1 RM tests in bench press and leg press), rapid strength capacity and strength endurance capacity in upper body muscles (measured with push-up test in 30 seconds) and explosive strength capacity in lower body muscles (measured with sergeant jump test). Five women with an average of 33(±5) years of age all new to Crossfit, performed these tests at two separate occasions with a training period of four weeks consisting of 12(±3,67) Crossfit sessions in between.The result showed a significant improvement in the maximal strength capacity of the leg extension muscles (p=0,025).

The purpose of this examination was to se how exercise affects the learning capacity. In this work I have chosen to integrate natural science with sport and the target group was a primary department. The two areas I integrate with sports were: the digestive system and knowledge of deciduous trees. I split the class in two different groups. One group got to have a theoretical lesson and the other one got to have an exercise lesson.

The purpose of this report is to present some of the market's façade panels and to do a survey of Masonite façade panels and compare. Therefore I have looked closer on potential competitors and studied their assembly method and properties. I will also propose suggestions on installing Masonite panels and improvements to the current carrying system. The carrying system for façade panels in general. Various key people in various areas of the construction industry have been interviewed. People with a wide knowledge of theory and with real work experience have been my main focuses too implement this survey.

ABSTRACTThe aim of the observation study was to examine the dental hygienists working tasks and the time they used carrying them out. Four dental hygienists where observed during four days each. The total time the dental hygienists used with patients during sixteen fulltime days come to a sum of 89 hours of the possible 111 hours. Twelve hours was late cancels and time when patients didn?t come to their appointment and ten hours were used for meetings.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

Microproduction, also called distributed generation, is something that has become more and more popular in the electric grid. Microproduction can however lead to unacceptable performance if several units are installed in the same low voltage network. It is therefore good to know a limit where the performance of the low voltage network becomes unacceptable based on given parameters. This limit is usually called hosting capacity.In this report the hosting capacity with respect to voltage and current have been studied in three low voltage networks which are located in Falu Elnäts concession area. This has been done by simulations in a GIS-program where critical times of the grid have been simulated.